BLACK FRIDAY -50%Pendora Producer Bundle: 49 € 99 €, course and drum kits includedENDING SOONGet the bundle →Get it →
Back to blog

How to Make a Lo-Fi Hip Hop Beat (Step by Step)

To make a lo-fi hip hop beat, set your project between 70 and 90 BPM, loop a soft jazzy chord progression (7th and 9th chords on Rhodes or felt piano), add muted drums with heavy swing and loose timing, then roll off the highs and add saturation, wobble and vinyl noise. Keep the arrangement simple: lo-fi is built to loop, not to build to a drop. The chords carry the vibe, so if the loop doesn’t feel good on its own, fix that before touching the drums.

This guide walks through the full process step by step, mostly with stock FL Studio plugins, in the same format as our Detroit type beat guide. Most of the work happens in the groove and the texture.

What is a lo-fi hip hop beat?

A lo-fi hip hop beat is a slow, mostly instrumental hip hop loop with jazzy chords, soft swung drums and a deliberately worn sound: muffled highs, tape wobble, crackle. It is the sound of study playlists and Lofi Girl streams, and it sits between boom bap and ambient music. Native Instruments sums up the format in its lo-fi hip hop tutorial: lo-fi “generally sits around 60-90 BPM,” leaves “plenty of space between the drums,” and uses reverb, delay, chorus and bitcrushing “generously to up the nostalgic ante.”

The same Native Instruments piece describes the structure as “simple and repetitive, and that’s exactly the point,” with most tracks running about 1 to 3 minutes. The loop has to hold up for two minutes without getting annoying.

What tools do you need to make a lo-fi beat?

You need a DAW, one warm keys sound, a soft drum kit, a low-pass filter, a saturator and something that adds noise or wobble. Every DAW ships with enough to do it. In FL Studio, the Image-Line edition comparison lists FL Keys, Fruity Filter, Fruity Reeverb 2, Fruity Chorus and Fruity Squeeze as included in all editions, so even the cheapest edition covers the basics.

Job FL Studio stock option Edition (per Image-Line) Paid alternative
Keys and chords FL Keys All editions Any Rhodes or felt piano instrument, or a preset bank
Bit reduction and grit Fruity Squeeze All editions XLN Audio RC-20 Retro Color
Darkening the highs Fruity Filter All editions Any EQ with a gentle low-pass
Warm chorus wobble Vintage Chorus (Juno 6 model) Signature Bundle and up Fruity Chorus in all editions is the free fallback
Space Fruity Reeverb 2 All editions Any plate or room reverb
Chopping samples Slicex Producer Edition and up See our sample chopping plugins list

On the paid side, the plugin most lo-fi tutorials reach for is XLN Audio RC-20 Retro Color, which XLN describes as recreating “the sound and imperfections of vintage recording gear,” with noise, wobble, distortion, digital degradation, space and loss modules plus tape-style Varispeed at 1/2, 1/4 or 1/8 speed. It is not required: stock tools get you most of the way.

Step 1: What tempo should a lo-fi beat be?

Set your project between 70 and 90 BPM for a standard lo-fi beat, or drop to 60 to 70 BPM for a sleepier, ambient feel. Sources agree on the range: MusicRadar’s step-by-step lo-fi drum tutorial by mixer and producer Jon Musgrave says “lo-fi tempos are normally between the range of 60 bpm to 80 bpm” and builds its example at 80 BPM in 4/4, while Native Instruments builds its example at 65 BPM.

Around 85 BPM the beat still has a head nod and can work for a rapper. Around 65 BPM it turns into background music. For a rap type beat, stay in the upper half of the range.

Step 2: How do you write lo-fi chords?

Write a 2 to 4 chord loop using 7th or 9th chords, play it on a soft Rhodes, felt piano or muted guitar, and leave the timing slightly human. The chord loop is the most important part of a lo-fi beat. Native Instruments uses a VI, i, V7 progression in A minor (F major, A minor, E7) and notes they “added some extension notes” to make it “feel a bit more soulful and jazzy,” with the advice to “keep it minimal and evocative.”

A practical recipe for a first loop:

  • Pick a minor key you are comfortable with, for example A minor.
  • Stack each chord to four notes: root, third, fifth and seventh. Fmaj7, Am7, Dm9 and E7 already sound lo-fi before any processing.
  • Voice the chords close together in the middle of the keyboard (around C3 to C5) so they sound warm, not bright.
  • Roll the chords: move each note a few ticks later than the one below it, like a player’s hand. In the FL Studio piano roll, nudging by hand works fine.
  • Lower and vary velocity so no two chords hit at the same strength.

If you want a sampled loop instead, the classic route is chopping old jazz or soul records. Native Instruments warns that these samples “can be tricky to license,” which matters the moment you sell a lease. Playing your own chords avoids that problem completely, and a royalty-free preset bank gives you the same warm tone without clearance issues. If you are weighing presets against loops, our sound bank vs sample pack breakdown covers the trade-off.

Step 3: How do you program lo-fi drums?

Program a simple kick and snare pattern, put the snare on 2 and 4, add 8th-note hats with varied velocity, then apply swing so the offbeats land late. Lo-fi drums should be soft and short. Pick a kick with little click, a dusty snare or rimshot, and closed hats that are not too bright. MusicRadar’s tutorial makes a point worth following: swapping a sound for a better one “is often more fruitful than trying to change existing sounds using processing.”

Jon Musgrave’s pattern in that MusicRadar tutorial is a good template to copy:

  • Core hits: kick on beat 1, snare on beats 2 and 4, kept quantized as the anchor.
  • Kick variations: in bars 1 and 3, a grace note on the last 16th and an extra kick on the 10th 16th. In bars 2 and 4, a kick on the 11th 16th.
  • Feel: swing pushes the bar 1 and 3 extra kicks slightly later, while the 11th-16th kicks in bars 2 and 4 are moved very slightly earlier by hand.
  • Hats: 8th notes, an open hat on the last 8th of bars 2 and 4, then “structured (not random!) velocity changes,” starting by lowering the “ands.”
  • Shaker: 16ths with “substantial swing so the ‘ands’ are delayed.”

In FL Studio, the Channel Rack has a global swing control, and the FL Studio manual explains you can set a per-channel Swing Mix (0, 25, 50, 75 or 100 percent) so the kick stays tight while the hats and shaker swing harder. That split is the quickest way to get the lazy feel without the beat sounding drunk.

Then process the drum bus. Native Instruments adds a gentle low-pass “from 3.12 kHz to take out any crispy highs from the kit.” In stock FL, Fruity Filter plus a light dose of Fruity Squeeze, which Image-Line calls “particularly effective when applied to drum loops,” gets you close.

Step 4: Do lo-fi beats need bass and a melody?

Lo-fi beats need some low end, but not necessarily a separate bass line, and the melody should be short and repetitive. Many producers let a long, tuned kick or the left hand of the chords carry the bass. In MusicRadar’s Beat Building lo-fi hip-hop session, the kick is “a long, powerful 808 kick, tuned to the root of the track as it’s also providing the primary bass.”

If you add a bass, use a round sine or upright-style sound that follows the chord roots, quieter than the keys. If the low end gets crowded, the rules from our guide on mixing 808s without mud apply: one main source per low frequency range.

For the melody, write a short 2-bar phrase with lots of space. Native Instruments leaves its melody unquantized because “the ‘janky’ moments that sound out of time add to the feeling.” Good lead sounds: kalimba, music box, soft bells, muted guitar, flute, kept quieter than you think.

Step 5: How do you make a beat sound lo-fi?

A beat sounds lo-fi when the highs are rolled off, the signal is saturated or bit-reduced, the pitch wobbles slightly, and a layer of noise sits underneath. Apply it in moderation per channel, then a little on the master. Texture cannot save a weak chord loop.

A stock FL Studio chain for the keys:

  • Fruity Filter as a low-pass to dull the top end.
  • Fruity Squeeze with the mix knob low for grit. Image-Line’s Fruity Squeeze manual page explains that its Squarize control “reduces the bit-depth” and makes the output “sound gritty.”
  • Vintage Chorus if you have Signature or above. Image-Line says it is modeled after the Roland Juno 6 bucket brigade chorus, known “for its warm, analog sound.” Otherwise use Fruity Chorus with a slow rate for a light tape-style wobble.
  • Fruity Reeverb 2 on a send, darker and shorter than you would use in a trap beat.

For noise, layer a vinyl crackle or room tone sample on its own channel, low in the mix, and filter it so it does not cover the hats. MusicRadar’s Beat Building session also adds “saturation across the whole beat to gel everything and add presence to the kick,” which is a good final step on the master. RC-20 can replace this whole chain if you own it.

Step 6: How do you arrange a lo-fi beat?

Arrange a lo-fi beat by introducing one element at a time in 4 or 8-bar blocks, dropping parts out when the loop gets repetitive, and bringing them back. A 2-minute track at 80 BPM is only about 40 bars, so you do not need many sections. Native Instruments’ advice is to “bring in one element at a time for four or eight bar phrases” and use small ear candy, like a reverse crash, to mark transitions.

A simple layout that works:

  • Intro (4 bars): chords only, filtered.
  • Loop A (8 bars): drums and bass enter, filter opens.
  • Loop B (8 bars): melody enters.
  • Break (4 bars): drums out, chords and noise only.
  • Loop C (8 bars): everything back, plus the counter-melody or shaker.
  • Outro (4 to 8 bars): elements drop out one by one, or the filter closes.

What are the most common lo-fi beat mistakes?

  • Too much texture. Crackle, bitcrushing and wobble on every channel turns the beat into mush. Keep one element relatively clean.
  • Random velocity. Humanizing means patterns, not dice rolls. MusicRadar’s tutorial is explicit that velocity changes should be “structured (not random!).”
  • Uncleared samples on a beat you sell. A flipped jazz record can get a beat taken down or claimed. Play your own chords or use royalty-free sounds.

FAQ

What BPM is lo-fi hip hop?

Most lo-fi hip hop sits between 60 and 90 BPM. MusicRadar gives 60 to 80 BPM as the normal range and Native Instruments gives 60 to 90 BPM. Use 80 to 90 BPM if you want a rapper to ride it, and 60 to 70 BPM for a slower, ambient playlist feel.

Can you make lo-fi beats in FL Studio without paid plugins?

Yes. FL Keys, Fruity Filter, Fruity Squeeze, Fruity Chorus and Fruity Reeverb 2 are all listed by Image-Line as included in every FL Studio edition, which covers chords, filtering, grit, wobble and space. A paid plugin like RC-20 is faster, but it is not required.

What chords are used in lo-fi?

Lo-fi relies on extended chords: major 7th, minor 7th, minor 9th and dominant 7th, voiced close together in the middle register. A 2 to 4 chord loop such as Fmaj7, Am7, Dm9, E7 in A minor is a typical starting point.

Verdict

A lo-fi hip hop beat is a good chord loop, swung soft drums and controlled degradation, at 70 to 90 BPM. Spend most of your time on the chords and the groove, use stock filtering and saturation for the texture, and keep the arrangement simple. You can make a release-ready lo-fi beat with only the plugins included in every FL Studio edition.

Where Pendora fits, honestly: Pendora is a preset plugin built for trap, drill, R&B and afro, not a dedicated lo-fi instrument, so if you only make lo-fi, a sampler and a good Rhodes may serve you better. That said, its 277 presets include keys, pads, bells and flutes, with names like Space Rhodes, Snow Keys, Pad Tape and Kalimba listed on the site, and they take lo-fi processing well. Everything is royalty-free for beats you sell, which solves the sample clearance problem. If you want to test the sound first, Pendora Lite has 30 presets for a one-time 29 euros, or browse the rest of the Tiger-Sounds shop for drum kits.

Valentin Cordier

Written by Valentin Cordier

Valentin Cordier is the founder of Tiger-Sounds, an independent VST company building boutique sound banks and drum kits for trap and drill producers since 2020. His flagship plugin Pendora is used by 500+ producers and featured by 15+ YouTube producers.

Keep reading

Ready to upgrade your sound? Try Pendora.

275+ studio-ready presets across trap, drill, dark trap, phonk, boom bap and pluggnb. One-time payment, lifetime updates.

Discover Pendora V3
Select your currency
EUR Euro